O-Rings for 3 and 4mm Cord (choose quantity)
Product Information
Categories: JEWELRY SUPPLIES, Jump Rings and O Rings, Miscellaneous Jewelry Components$5.99 – $8.99 H.S.T.
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Product brand
Buna
Product Categories
Description
Our offers
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here
Try using our screw eyes to insert onto the ends of the thick cord. You will then be able to attach jump rings clasps or other fasteners. Turn your small leftover pieces of the thicker buna cords into beads or earrings!
Find end caps here.
There aren't premade end caps for the 12.7mm cord. I suggest using screws eyes or making end caps from wire.
Barrel-End Cap to fit 3mm Cord (36 pack) Silver Plate
Barrel End Cap with loop to fit 3mm Cord (36 pack) Silver Plate
These end caps are a nice heavy gauge. Glue any 3 mm cord into end cap.
Use with our 3 mm Buna cord.
Use with cyanoacrylate glue, epoxy or resin.
Related Products
Magnetic Closure-Matte Acrylic Clasp-ID 8mm
Magnetic Closure-Matte Acrylic Clasp-ID 8mm 1set
Perfect for using with our black 8mm Buna cord. Creates a unified, seamless look.
21X10.5 mm Inner dimension is 8 mm
Works with 8 mm cord including our Buna cord. Glue in place using a super glue.
O-Rings for 2mm Cord (choose quantity)
O-rings to fit Buna and other Cording
These o-rings will fit the 2mm (up to 3mm cord)
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
We now carry O-rings in both a Thin and Thick version to fit the 8mm and 12.7mm (1/2") Buna cords.
Earring Base 6mm (144 pcs) Stainless Steel
6 mm Flat Post - Stainless Steel Studs , Round Earring Base-Pack of 144- (Stabilizer Clutches sold separately)
These surgical steel bases can be glued onto your baked polymer clay earrings. They can be embedded for added strength and durability. Or, attach object to base with strong glue or epoxy.
Glue on Bail (36 pk)
Glue on Bails- 16mm Package of 36
These bails are a lovely, smooth, highly polished choice. The picture shows them on 2.5mm SoftGlass 16mm from top to bottom. Available in both Gold Plate and Silver Plate. Packages of 36
Glue on or embed into polymer clay.
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Bail- Pewter-Ring with Lines-Over sized (Pack of 4)
Pewter Bails-Over sized Pack of 4
These bails are textured with lines cut out.
These pewter bails will fit Buna cord up to 12.7 mm in thickness (1/2") Great for using several thin strands of cord too or use with Sari silk, T-shirt tubes etc. Approximately 3/4" wide X 5/8" tall.
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver 7 mm 144 pcs
Measured by weight so count may not always be exact.
Channel Ring- 3 pack-Silver Plated
Channel Ring- Available in sizes 6.5, & 7 Silver Plated
These channel rings are silver plated base metal with a deep channel for filling with your favourite thing.
Use clay veneers or paper. Or, use 2 part epoxy clay and fill the channel with your favourite Swarovski stones or beads. Limited only by your imagination! Size 8 is no longer available. Once The other sizes are gone, they're gone!
Channel width is just under 3/16".
Black Buna Cording (choose thickness 2mm-5mm) sold by the meter
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is.
Use various metal end caps, create your own from clay or wrap with wire to finish off the ends.
This cord hangs nicely and because it is so light many strands can be used together for quite a dramatic result.
Use O-rings for a finished look or to keep beads etc. in place.
Match the correct size of O-ring to the cord easily. 5mm O-rings ft the 5mm Buna cord and so on.
Use our screw eyes in the ends of the really thick cord to attach clasps etc.




