Screw Eyes – Gold -1cm long 144 pcs
Product Information
Product code: TA16419-G Categories: BULK Jewelry Supplies, JEWELRY SUPPLIES$15.99 H.S.T.
Screw Eyes Gold – 1 cm in length with a 3mm eye opening 144 pcs
These are our smallest screw eyes yet. We looked long and hard for a source for these.
Use screw eyes with polymer clay as a means to hang or attach other findings and turn your creations into jewelry or wall hangings.
You can also screw into the ends of thick Buna cord and then attach jump rings or clasps etc.
You can alter the original colour of the screw eyes with alcohol inks or patinas etc. to change the look of the metal if desired.
Measured by weight so count may not always be exact.
5 in stock
Product Categories
Additional information
| Weight | 0.08 kg |
|---|---|
| Dimensions | 6 × 5 × 1 cm |
| Colour |
Only logged in customers who have purchased this product may leave a review.
Our offers
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here
Try using our screw eyes to insert onto the ends of the thick cord. You will then be able to attach jump rings clasps or other fasteners. Turn your small leftover pieces of the thicker buna cords into beads or earrings!
Find end caps here.
There aren't premade end caps for the 12.7mm cord. I suggest using screws eyes or making end caps from wire.
Related Products
Earring Base 6mm (144 pcs) Stainless Steel
6 mm Flat Post - Stainless Steel Studs , Round Earring Base-Pack of 144- (Stabilizer Clutches sold separately)
These surgical steel bases can be glued onto your baked polymer clay earrings. They can be embedded for added strength and durability. Or, attach object to base with strong glue or epoxy.
Bail- Pewter-Ring with Lines-Over sized (Pack of 4)
Pewter Bails-Over sized Pack of 4
These bails are textured with lines cut out.
These pewter bails will fit Buna cord up to 12.7 mm in thickness (1/2") Great for using several thin strands of cord too or use with Sari silk, T-shirt tubes etc. Approximately 3/4" wide X 5/8" tall.
Channel Ring- 3 pack-Silver Plated
Channel Ring- Available in sizes 6.5, & 7 Silver Plated
These channel rings are silver plated base metal with a deep channel for filling with your favourite thing.
Use clay veneers or paper. Or, use 2 part epoxy clay and fill the channel with your favourite Swarovski stones or beads. Limited only by your imagination! Size 8 is no longer available. Once The other sizes are gone, they're gone!
Channel width is just under 3/16".
End Cap-Connector with prong
For rattail or any cording that is approximately 2mm in diameter; 8mm long ; packages of 36. Gold finish.
Jump Rings – Silver 5mm 144 pcs
Jump Rings - Silver 5 mm 144 pcs
Measured by weight so count may not always be exact.
Barrettes Gold 12pcs
Barrettes Gold 12pcs
Easily springs opens by pushing tabs. 58mm / 1.2" long
Package of 12
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
O-Rings for 3 and 4mm Cord (choose quantity)
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.



Reviews
There are no reviews yet.