-
- Video
Additional information
| Weight | 0.13 kg |
|---|---|
| Dimensions | 11 × 11 × 5.5 cm |
Only logged in customers who have purchased this product may leave a review.
Our offers
Quick View
Head Pins 144 pcs
Head Pins -Gold Tone 144 pcs
Use these to attach beads or polymer pieces etc. 45mm/1.75" in length
Measured by weight so count may not always be exact.
Related Products
Quick View
Bail- Pewter-Ring with Lines-Over sized (Pack of 4)
Pewter Bails-Over sized Pack of 4
These bails are textured with lines cut out.
These pewter bails will fit Buna cord up to 12.7 mm in thickness (1/2") Great for using several thin strands of cord too or use with Sari silk, T-shirt tubes etc. Approximately 3/4" wide X 5/8" tall.
Quick View
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Quick View
Curved Nose Pliers
Curved-Nose Pliers with Soft Grip Handle
The narrow nose allows you to bend looped or coiled ends to avoid catching; creating a more finished look.
Quick View
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Quick View
O-Rings for 2mm Cord (choose quantity)
O-rings to fit Buna and other Cording
These o-rings will fit the 2mm (up to 3mm cord)
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
We now carry O-rings in both a Thin and Thick version to fit the 8mm and 12.7mm (1/2") Buna cords.
Quick View
Magnetic Closure-Stainless Steel Clasp-ID 8mm (5 clasps)
Magnetic Closure-Stainless Steel Clasp (5 sets) ID 8mm
Beautiful quality, strong magnetic hold.
19X9mm Inner dimension is 8 mm
Works with any 8 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Quick View
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here
Try using our screw eyes to insert onto the ends of the thick cord. You will then be able to attach jump rings clasps or other fasteners. Turn your small leftover pieces of the thicker buna cords into beads or earrings!
Find end caps here.
There aren't premade end caps for the 12.7mm cord. I suggest using screws eyes or making end caps from wire.
Quick View
O-Rings for 3 and 4mm Cord (choose quantity)
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Reviews
There are no reviews yet.