Screw Eyes – Silver 1cm long 144 pcs
Product Information
Product code: TA16419-S Categories: BULK Jewelry Supplies, JEWELRY SUPPLIES$15.99 H.S.T.
Screw Eyes – Silver 1 cm in length with a 3mm eye opening 144 pcs
These are our smallest screw eyes yet. We looked long and hard for a source for these.
Use screw eyes with polymer clay as a means to hang or attach other findings and turn your creations into jewelry or wall hangings.
You can also screw into the ends of thick Buna cord and then attach jump rings or clasps etc.
You can alter the original colour of the screw eyes with alcohol inks or patinas etc. to change the look of the metal if desired.
Measured by weight so count may not always be exact.
4 in stock
Product Categories
Additional information
| Weight | 0.08 kg |
|---|---|
| Dimensions | 6 × 5 × 1 cm |
| Colour |
Only logged in customers who have purchased this product may leave a review.
Our offers
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here
Try using our screw eyes to insert onto the ends of the thick cord. You will then be able to attach jump rings clasps or other fasteners. Turn your small leftover pieces of the thicker buna cords into beads or earrings!
Find end caps here.
There aren't premade end caps for the 12.7mm cord. I suggest using screws eyes or making end caps from wire.
Related Products
Bails- Pewter- Flat Rectangular Pad-Small(Pack of 24)
Pewter Bails- Rectangular Flat Pad Pack of 24 (small)
These glue-on bails are an easy and convenient way to hang any flat backed pendant.
Length of pad area is 3/8". Perfect for 2mm cording.
Jump Rings – Silver 5mm 144 pcs
Jump Rings - Silver 5 mm 144 pcs
Measured by weight so count may not always be exact.
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here
Try using our screw eyes to insert onto the ends of the thick cord. You will then be able to attach jump rings clasps or other fasteners. Turn your small leftover pieces of the thicker buna cords into beads or earrings!
Find end caps here.
There aren't premade end caps for the 12.7mm cord. I suggest using screws eyes or making end caps from wire.
Earring Base 6mm (144 pcs) Stainless Steel
6 mm Flat Post - Stainless Steel Studs , Round Earring Base-Pack of 144- (Stabilizer Clutches sold separately)
These surgical steel bases can be glued onto your baked polymer clay earrings. They can be embedded for added strength and durability. Or, attach object to base with strong glue or epoxy.
Bail- Pewter-Ring with Lines-Over sized (Pack of 4)
Pewter Bails-Over sized Pack of 4
These bails are textured with lines cut out.
These pewter bails will fit Buna cord up to 12.7 mm in thickness (1/2") Great for using several thin strands of cord too or use with Sari silk, T-shirt tubes etc. Approximately 3/4" wide X 5/8" tall.
Horizontal Pin Converters (Gold tone)
Do you have a brooch that you just love but you’d get more mileage out it if it could double as a pendant? Here is a new easy solution.
The opening for the chain or cord is large at 15mm X 6mm so it can accommodate some of the larger clasps making it even more versatile and useful.
Do you sell brooches/pins at your art shows? Why not have these available for purchase by your customers so they can see even more value in the piece of jewelry that they are purchasing from you?
Black Buna Cording (choose thickness 2mm-5mm) sold by the meter
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is.
Use various metal end caps, create your own from clay or wrap with wire to finish off the ends.
This cord hangs nicely and because it is so light many strands can be used together for quite a dramatic result.
Use O-rings for a finished look or to keep beads etc. in place.
Match the correct size of O-ring to the cord easily. 5mm O-rings ft the 5mm Buna cord and so on.
Use our screw eyes in the ends of the really thick cord to attach clasps etc.
Jump Rings – Gold 5mm 144 pcs
Jump Rings - Gold 5mm 144 pcs
Measured by weight so count may not always be exact.
Brass Cuff Bracelet 1″ Wide-Domed Surface
Brass Cuff Bracelet 1" Wide-Domed Surface
These brass forms are perfect for covering with polymer clay (or painst, gesso etc.) and wearing or reuse multiple times as a form.
This brass bracelet cuff is 1" wide and has a gently domed surface. The circumference of the oval formed by the bracelet is approximately 7.5"



Reviews
There are no reviews yet.